Jump to content

Option self Dimming Mirror


Recommended Posts

Is it possible to add/replace an interior or an exterior self dimming mirror to a 2014-2017 LT similar to what is standard on the LTZ? Thanks

 

Hey There. Yes, this is possible. I've done them myself.

The Inside Rearview Mirror thread where I posted the "How to" is here:

 

http://www.gm-trucks.com/forums/topic/192050-a10-inside-rearview-auto-dimming-mirror-conversion-dd8/?hl=a10+inside

 

If you also want the dimming to occur on the Driver's Side Mirror, you'll have to upgrade your DL8 Mirror to DL3 Mirrors. Here is my thread for that.

 

http://www.gm-trucks.com/forums/topic/190736-2016-silverado-lt-dl8-to-dl3-mirror-conversion-finally-complete-3/page-4?hl=dl8+to+dl3+conversion&do=findComment&comment=1900660

 

I have also made it easier for the DL8 to DL3 upgrade and make it Plug and Play with a custom harness that I build. Here is the thread for that.

 

http://www.gm-trucks.com/forums/topic/196569-fs2014-silveradosierra-custom-plug-and-play-harness-for-dl8-to-dl3/?hl=dl8+to+dl3+conversion&do=findComment&comment=1923331

Edited by pgamboa
  • Like 1
Link to comment
Share on other sites

To convert your mirrors to the DL3 power folding mirrors, you'll need to buy the mirrors, correct powerfold switch and the harnesses from Pgamboa to make them work. There is a known issue with the puddle lamps not having 12v from the BCM on the 14's though. Mine does it, but I will do the diode mod here when I get it.

  • Like 2
Link to comment
Share on other sites

Exactly what cbrsilv15 said...

 

Jim, also keep in mind that in order to get auto dim on the driver's side mirror, it is dependent on having the auto dim rear view mirror AND the circuits required the rear view mirror to pass the auto dim circuits to the driver side. When the rear view mirrors auto dim activates, it sends that single to the driver side mirror.

 

My harness will have the auto dim circuits pinned (since I am unwrapping them anyway for the lighting circuits) but you have to complete the mod for the rear view mirror to get them to activate.

 

Also - I would need a photo of the door connector (the side that goes into the body) to verify what pins you have/don't have.

 

 

Sent from my iPhone using Tapatalk

Edited by pgamboa
Link to comment
Share on other sites

I have a 2014 Lt silverado 1500 with the standard mirrors (no tow Mirrors), will this work on my truck? So all I have to do is buy your harness or do I also have to buy a new set of mirrors?

 

If you are talking about changing ALL the mirrors you will need pgamboa's harnesses.

 

If you only want to change the interior mirror to auto-dim and keep you existing outside mirrors "as-is" just follow his first link. There are also instructions on other forums that just pull a power and ground from the overhead console.

Link to comment
Share on other sites

  • 2 years later...

Hello,   I have a 2016 Silverado LT I bought last Aug.  Soon as i got it home I ordered a auto dimming rear view mirror thinking it was plug and play. When i saw it wasn't dimming I started to do some reading. Ran across all this info on it. I'd like to use the rear view mirror but all the links above comes back to this page. I really don't care about the outside mirrors. Also I don't see how or where to buy a wiring harness if i need one. 

thanks

Link to comment
Share on other sites

Send pgamboa a message and he will hook you up. I had no desire to change the outside mirrors, so he made me a wiring harness to add the inside mirror and get the reverse disable working.

Works great. I will warn you the wire you need to land in the X61 box is a real pain to get in there.


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

  • 3 months later...
  • 1 year later...
On 1/27/2017 at 5:29 PM, pgamboa said:

 

Hey There. Yes, this is possible. I've done them myself.

The Inside Rearview Mirror thread where I posted the "How to" is here:

 

http://www.gm-trucks.com/forums/topic/192050-a10-inside-rearview-auto-dimming-mirror-conversion-dd8/?hl=a10+inside

 

If you also want the dimming to occur on the Driver's Side Mirror, you'll have to upgrade your DL8 Mirror to DL3 Mirrors. Here is my thread for that.

 

http://www.gm-trucks.com/forums/topic/190736-2016-silverado-lt-dl8-to-dl3-mirror-conversion-finally-complete-3/page-4?hl=dl8+to+dl3+conversion&do=findComment&comment=1900660

 

I have also made it easier for the DL8 to DL3 upgrade and make it Plug and Play with a custom harness that I build. Here is the thread for that.

 

http://www.gm-trucks.com/forums/topic/196569-fs2014-silveradosierra-custom-plug-and-play-harness-for-dl8-to-dl3/?hl=dl8+to+dl3+conversion&do=findComment&comment=1923331

Why can't I follow your link to the first one?

Link to comment
Share on other sites

  • 1 month later...
  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.